M2 Super Tin Coated Drill Bit

• DIN338 standard, straight shank, with 130º split point, tin coating.

• Reduced shank--If you require drill bits over 13.0mm in diameter, we suggest our Reduced Shank Drills.

• Constructed of 6542 high speed steel. 130-degree drill bits will substantially outperform 135-degree drills in work hardening stainless steel.

• High Helix provides longer working lifetime and faster feed speed, promotes better chip ejection.

• Especially suitable for drill on stainless steel, good sharpness, low drilling noise, long service life. With industrial Tin coated finish (surface is wear-resistant, heat insulated and smooth). Also suitable for drilling on various common, medium and high hardness metal.

ITEM NO.	Diameter	Flute Length	Over Length
0383010	1.0	12	34
0383015	1.5	20	43
0383020	2.0	24	49
0383025	2.5	30	57
0383030	3.0	33	61
0383035	3.5	39	70
0383040	4.0	43	75
0383045	4.5	47	80
0383050	5.0	52	86
0383055	5.5	57	93
0383060	6.0	57	93
0383065	6.5	63	101
0383070	7.0	69	109
0383075	7.5	69	109
0383080	8.0	75	117
0383085	8.5	75	117
0383090	9.0	81	125
0383095	9.5	81	125
0383100	10.0	87	133
0383105	10.5	87	133
0383110	11.0	94	142
0383115	11.5	94	142
0383120	12.0	101	151
0383125	12.5	101	151
0383130	13.0	101	151
0383135	13.5	108	160
0383140	14.0	108	160
0383145	14.5	114	169
0383150	15.0	114	169
0383155	15.5	120	178
0383160	16.0	120	178
0383165	16.5	125	184
0383170	17.0	125	184
0383175	17.5	130	191
0383180	18.0	130	191
0383185	18.5	135	198
0383190	19.0	135	198
0383195	19.5	140	205
0383200	20.0	140	205